Garret K. Woodward: Getting Through Winter on $28

Getting Through Winter on $28

Garret K. Woodward

James McGarvey shakes his head. “I cringe when I hear somebody is paying more than $50 a year to heat a house in Western North Carolina,” the 68-year-old said. “We have learned from building science that with a near perfect thermal/pressure envelope, homes can be heated much of the winter from internal heat gains such as lights, the fridge, electrical appliances such as computers and TV’s, an body heat if built correctly.”

Sitting on the back porch of his home in Candler, McGarvey and his wife Cilla relax into their seats and gaze out onto their property. In the distance, the majestic peaks of the Blue Ridge Mountains loom, while the foreground is painted by lush vegetation and the sounds of a rooster corralling chickens.

“It’s not rocket science to build a low cost energy efficient home — build it small and built a perfect building envelope, i.e., well insulated, air tight, and no thermal bridges,” he stated, referring to his home.

Situated on a 7/10th-acre lot, the McGarvey’s residence is an 830-square foot testament to effective modern green building. Constructed over the course of a year and a half, it’s the ideal example of proper design applied to efficient technologies, and what the long-tern benefits, both financial and environmental, can be. The McGarvey’s built their home with their own labor and approximately $38,000 in materials.

“By just doing a few simple things during construction, you can easily cut your costs and your energy dependency,” he said.

James notes that he had three factors in mind that influenced the design process of the house – cost, moisture control, and control of heat loss and heat gain. Function would trump form in all aspects of building process. Standing in the front yard, one immediately notices the home is built on poles. Pole construction for homes is not common except along the coastal areas of the U.S., but James points out that this method of construction helped them achieve all three of their goals: cost, moisture control, and energy efficiency.

“Pole construction kept our foundation costs under $700, plus the walls in pole construction are not load bearing,” James said. Therefore there is no need for headers over windows and doors, reducing lumber cost. Plus, as James points out, headers over doors and windows are huge thermal bridges reducing the overall R-Value of a buildings wall. So, pole construction allowed for a cost savings on the foundation as well as reducing thermal bridging so common in platform construction.

This type of construction also allowed us to move the house up seven feet in the air, thus getting space under the house for a carport as well as getting the house away from the moist ground and all the moisture issues associated with a basement or crawl space.

“This house is airtight,” he said. “As far as I have researched, I’ve only come across a handful of other homes in the United States as tight as this one.” The blower door reading put this house at .07 ACH@50Pa, a reading that puts the home in the top one tenth of a percent as far as air tightness goes. James points out that this tightness level was achieved by putting an inner layer of OSB board on the inside of the house and taping and caulking all the seams. All plumbing and electrical work was then surface mounted so there would be no penetrations of the air barrier. “Our walls system also has two 2×4 staggered walls to achieve an R-45 wall system with no thermal bridging of solid wood inside to outside,” he said.

“We gave cooling of the house a lot of thought,” James said. “We have reflective roofing and siding, and large overhangs keeping the sun out off the windows, making for zero cooling cost. Open the doors and windows at night, close them during the day, and the house remains nice and cool.”

Heading up the stairs and into the abode, one immediately notices the cathedral ceiling and optimization of space within. With 12-foot cathedral ceilings and only partial walls separating the living spaces, this house does not feel small. Also, James points out the use of a dark ceiling to add to the spacious feeling of the home.

James’ extensive knowledge of energy efficiency isn’t something he picked up overnight. Actually, he was an energy auditor himself, conducting thousands of home energy audits over the years. In the early 1970s, during the infancy stages of home energy efficiency, James entered the building science weatherization industry. Bouncing around the country for work, he eventually landed a position as an executive director of a multi-million dollar nonprofit weatherization science training center in Syracuse, N.Y. Since retiring James has taught the national BPI building science certification courses and has worked with the Department of Energy to evaluate the DOE Weatherization Program in 11 Southeastern states.

While working for the Department of Energy evaluating energy programs around the Southeast, James and his wife came across Western North Carolina and fell in love with the region.

“We love the weather here, and the Blue Ridge Parkway,” James said, referring to his passion for motorcycles.

“If there’s anybody out there thinking about building something like this, I invite them to come and see what we’re doing,” James said. “Green building can be accomplished without spending a lot of funds on a building, so I encourage people to look into it.”

You can also view this article as it was originally published on pages 26-27 of the 2014 edition of the directory or as a pdf.